43SET MODE9N GeneralSet mode is used for programming infrequently changed val-ues or options of the functions.In addition, the IC-R6 has the Expand set mode which isused for programming even more infrequently changed val-ues or options of the functions. When turning the Expand setmode OFF, only half of the Set mode items are displayed forsimple operation.D Set mode entering and operationq Hold down [SET](TS) for 1 second to enter the Set mode.w Rotate [DIAL] to select a desired item.e While holding down [FUNC], rotate [DIAL] to select adesired value or option.r Push [SET](TS) to exit the Set mode, or repeat w and eto set other items.[DIAL]D Expand set mode ON/OFFq Hold down [SET](TS) for 1 second to enter the Set mode.w Rotate [DIAL] to select the “EXPAND” item.e While holding down [FUNC], rotate [DIAL] to turn theExpand set mode ON or OFF.Expand set mode OFF Expand set mode ONr Rotate [DIAL] to select a desired item.t While holding down [FUNC], rotate [DIAL] to select adesired value or option.yPush [SET](TS) to exit the Set mode, or repeat r and tto set other items.
