41PANEL DESCRIPTION1y AUTO WRITE CHANNEL ICON (p. 29)Appears when an auto write channel is selected.u SKIP ICONS (p. 30)± “SKIP” appears when the selected memory channel isspecified as a skip channel.± “PSKIP” appears when the displayed frequency isspecified as a skip frequency.i PRIORITY WATCH ICON (p. 33)Appears while priority watch is in use.o MEMORY ICON (pgs. 7, 10)Appears when the memory mode is selected.!0 MEMORY CHANNEL NUMBERShows the selected memory channel number. (pgs. 7, 10)!1 SIGNAL STRENGTH INDICATOR (p. 11)Shows the relative signal strength while receiving signals.!2 ATTENUATOR ICON (p. 13)Appears while the RF attenuator is in use.!3 RECEIVE MODE ICON (p. 12)Shows the selected receive mode.• FM, WFM and AM modes are selectable.!4 VOLUME EXCHANGE ICON (p. 49)Appears when the function of [DIAL] and [S]/[T] areexchanged.!5 FREQUENCY READOUTShows a variety of information, such as the operating fre-quency, Set mode contents, memory names.• The smaller “75,” “50” and “25” to the right of the readout indi-cate 0.75, 0.5 and 0.25 kHz, respectively.• The decimal point blinks during a scan.
