5710 OTHER FUNCTIONSN Data cloningCloning allows you to quickly and easily transfer the pro-grammed contents from one receiver to another; or datafrom a personal computer to a receiver, using the optionalCS-R6 CLONING SOFTWARE.D Cloning between receiversqConnect the OPC-474 cloning cable to the [SP] jack of themaster and sub-receivers.• The master receiver is used to send data to the sub-receiver.to [SP]MasterreceiverSubreceiverto [SP]NOTE: DO NOT push any key on the sub-receiver duringcloning. This will cause a cloning error.w While holding down [V/M], turn only the master receiverpower ON, to enter the cloning mode (master receiver only—power ON only for sub-receiver).Master receiver“CLONE” and “m” appearwhen entered the cloningmode.e Push [SQL] on the master receiver.• The receiver displays the following.During cloningAfter cloningMaster receiver display Sub-receiver displayr When cloning is finished, turn power OFF, then ON to exitthe cloning mode.
