Icom IC-R6 Instruction Manual

Also see for IC-R6: Price list Instruction manual Instruction manual Service manual

Contents

Icom IC-R6 Instruction Manual Manual pdf 31 page image

185MEMORY CHANNELS45N General descriptionThe receiver has 1350 memory channels, including 50 scanedge memory channels (25 pairs) for storage of often-usedfrequencies. A total of 18 memory banks, A to R, T, U, W andY can be selected. Up to 100 channels can be assigned toeach bank.D Memory channel contentsThe following information can be programmed into memorychannels:• Receive frequency (p. 9)• Receive mode (p. 12)• Duplex direction (+DUP or –DUP) with a frequency offset(p. 14)• Tone squelch or DTCS squelch ON/OFF (p. 35)• Tone squelch frequency or DTCS code with polarity (pp.36, 37)• Scan skip setting (p. 30)• Memory bank (p. 95)• Memory name (p. 97)• Tuning step (p. 22)N Selecting a memory channelq Push [V/M] to select the memory mode.• Push [V/M] to toggle between the VFO mode and the memorychannel mode.w Rotate [DIAL] to select a desired memory channel.• Only programmed channels are displayed.• While holding down [FUNC], rotate [DIAL] to select the memorychannel in 10 channel steps.AppearsRotate [DIAL] to selectthe memory channel.NOTE: Memory data can be erased by static electricity,electric transients, etc.In addition, it can be erased by malfunction and duringrepairs. Therefore, we recommend that memory data bewritten down or saved to a PC using the CS-R6 CLONINGSOFTWARE.