5910 OTHER FUNCTIONSN Partial resetIf you want to initialize the operating settings (VFO frequen-cy, VFO settings, Set mode contents) without clearing thememory contents, a partial resetting function is available forthe receiver.± While holding down [FUNC] and [TS], turn the power ONto partially reset the receiver.N All resetThe function display may occasionally display erroneousinformation (e.g. when first applying power). This may becaused externally by static electricity or by other factors.If this problem occurs, turn power OFF. After waiting a fewseconds, turn power ON again. If the problem persists, per-form the following procedure.• Partial resetting is also available. See to the left for details.IMPORTANT!:Resetting the receiver CLEARS all memory informa-tion and initializes all values in the receiver, including TVchannel skip setting.± While holding down [FUNC] and [Z], turn the power ONto reset the CPU.*The appearing frqeuencyis differ according toreceiver version.± While holding down [FUNC] and [TS], turn the powerOFF, then ON again to partially reset the receiver.
