Icom IC-R6 Instruction Manual

Also see for IC-R6: Price list Instruction manual Instruction manual Service manual

Contents

Icom IC-R6 Instruction Manual Manual pdf 52 page image

39TONE SQUELCH AND POCKET BEEP8N Tone/DTCS squelch operationThe tone or DTCS squelch opens only when receiving asignal with the same pre-programmed subaudible tone orDTCS code, respectively. You can silently wait for the speci-fied signal using the same tone.q Set a desired frequency in the FM mode.w Hold down [SET](TS) for 1 second to enter the Set mode.e Rotate [DIAL] to select the “EXPAND” item.r While holding down [FUNC], rotate [DIAL] to turn theExpand set mode ON.t Rotate [DIAL] to select the “TSQL” item.y While holding down [FUNC], rotate [DIAL] to select adesired subaudible tone setting from “TSQLS,” “TSQL,”“DTCS,” “DTCSS,” “TSQL (reverse),” “DTCS (reverse)”or “OFF.”Tone squelchDTCS squelchTone squelch (reverse)DTCS squelch (reverse)Tone squelch with pocket beepDTCS squelch with pocket beepu Push [SET](TS) to exit the Set mode.• One of “S T SQL,” T SQL,” “SDTCS,” “DTCS,” “T SQL-R”or “DTCS -R” appears according to the tone selection in step y.Tone squelchDTCS squelchDTCS squelch (reverse)Tone squelch (reverse)Tone squelch with pocket beepDTCS squelch with pocket beepi When a signal with the matched tone is received, thesquelch opens and the receiver emits audio.When pocket beep function is activated, the receiver alsoemits beep tones and blinks “S.”• Beep tones sound and “S” blinks for 30 seconds.o Push [FUNC] to stop the beeps and blinking manually.• “S” disappears and the pocket beep function is deactivated.!0 To cancel the tone squelch or DTCS, select “OFF” with the“TSQL” item in the Expand set mode, as described in stepy.