N PreparationD Battery installationq Remove the batter ycover from the receiver.w Install 2 R6(AA) sizeNi-MH or alkaline cellbatteries.• Be sure to observe thecorrect polarity.• Charge the Ni-MH bat-teries before use. (Seep.III for charging instruc-tions.)Keep the battery terminals clean. It’s a good idea to cleanthe battery terminals once a week.D Belt clipConveniently attaches toyour belt.Slide the belt clip into theplastic loop on the back ofthe receiver.D AntennaInsert the antenna connector intothe antenna base and tighten theantenna screw.• NEVER carry the receiver byholding only the antenna.• When the jack is not in use,keep the jack cover attachedto protect the connectors fromdust and moisture. For your informationThird-party antennas may increase receiver performance.An optional AD-92SMA ANTENNA CONNECTOR ADAPTER isavailable to connect an antenna with a BNC connector.D HandstrapTo facilitate carrying the receiver,slide the hand strap through theloop on the top of the belt clip.LatchIQUICK REFERENCE GUIDEQuick reference guide
