IIIQUICK REFERENCE GUIDE■ Your first contactNow that you have your IC-V82/U82 ready, you are excitedto get on the air. We would like to walk you through a fewbasic operational steps to make your first “On The Air” use anenjoyable experience.D About default settingThe [VOL] control function can be exchanged with [YY]/[ZZ]keys function in INITIAL SET MODE . However, in this QUICKREFERENCE, the factory default setting ([VOL] controlsaudio output level) is used to simplify instructions.D Basic operation1. Turning ON the transceiverAlthough you have purchased a brand new transceiver, somesettings may be changed from the factory defaults becauseof the Quality Control process. Resetting the CPU is neces-sary to start from factory default.➥ While pushing [MONI] and[D• CLR ], push and hold [PWR] for1 sec. to reset the CPU and turnpower ON.2. Adjusting audio output level➥ Rotate [VOL] to set the desiredaudio level.3. Adjusting the squelch level➥ While pushing and holding[MONI], push [YY] or [ZZ] to set thesquelch level.4. Tune the desired frequencyThe up/down keys, [YY]/[ZZ], willallow you to tune to the frequencythat you want to operate on. Page 14will instruct you on how to adjust thetuning step size.➥ Push [YY] or [ZZ] to adjust the fre-quency.PWRMONICLRDMONI[VOL]