5912OTHER FUNCTIONS1112■ SET MODEDD Entering SET MODEq Push [A• FUNC ], then push [8• SET] to enter SET MODE.w Push [YY] or [ZZ] to select the desired item.e Rotate [VOL] to select the condition/value.• To exit SET MODE, push [✱•ENT ] (or [D• CLR ]).NOTE: When the display type setting (pgs. 16, 65) in INI-TIAL SET MODE is selected other than “FR” (“CH” or “nm”)and accessing SET MODE from memory mode, most of setmode items are restricted.DD Repeater tone frequencySelects tone encoder frequency for accessing a repeater, etc.from one of 50 available frequencies.• 67.0–254.1 Hz (50 tones): 88.5 Hz (default)DD Tone squelch frequencySelects frequency for tone squelch or pocket beep operationfrom one of 50 available frequencies.• 67.0–254.1 Hz (50 tones): 88.5 Hz (default)• Available subaudible tone frequencies67.069.371.974.477.079.782.585.488.591.594.897.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.1FUNCASET8 ENT[VOL]Enter ExitSet
