IVQUICK REFERENCE GUIDEDirect frequency input from the key-pad is also available.➥ To enter the desired frequency,enter 6 digits starting from the100 MHz digit.• Entering three* to five digits thenpushing [✱• ENT ] will also set thefrequency. (*Some versions only re-quires two digits.)• When a digit is mistakenly input,push [D.CLR ] to abort input.5. Transmit and receive➥ Push and hold [PTT] to transmit, then speak into the mi-crophone; release to receive.■ Repeater operation1. Setting duplex➥ Push [A• FUNC ], then [4• DUP ] sev-eral times to select minus duplexor plus duplex.• The USA/CSA versions have an autorepeater function, therefore, settingduplex is not required.2. Repeater tone➥ Push [A• FUNC ], then [1• TONE ]several times until “ ” appears, ifrequired.TONE1FUNCADUP4FUNCA• Example 1— when entering 145.525 MHzPush• Example 2— when entering 144.800 MHzP.BEEP2DUP4DUPTONE 41 SCAN5 SCAN5 SCAN5Push DUPTONE 41 OPT0SET8 ENTCLRDKeypadENTQuick reference guide
