Icom IC-V82 Instruction Manual

Also see for IC-U82: Addendum Specifications Service manual Instruction manual Instruction manual

Contents

5711DIGITAL MODE OPERATION11■ GPS operationA GPS receiver (RS-232 output/NMEA format/4800 bps) canbe connected to [DATA] jack of the IC-V82/U82 to indicate thecurrent position (Latitude and Longitude). The position datacan also be transmitted with a message to another station.DD Position indicationq While connected to a GPS receiver, push [A• FUNC ] and[0• OPT] to enter OPTION SET MODE.w Push [YY] or [ZZ] several times to select the GPS setting.• “GPS” appears.e Rotate [VOL] to select the suitable sentence formatter forthe connecting GPS receiver.• Sentence formattersrPush [YY] twice to select the position indication.tPush and hold [0• OPT] for 1 sec. to enter the position indi-cation.• Latitude and longitude date appear in order as below.yAfter checking the current position, push [✱• ENT ] (or[D• CLR ]) to return to normal operating mode.IMPORTANT: When setting the sentence formatter instep e for connection to a GPS receiver, and you have al-ready programmed your own call sign, the GPS transmitsetting will automatically activate to every 3 minutes. Theautomatic transmission can be changed to an interval timeor deactivated, if desired. (see the next page)DegreesNorth or South MinutesAppearsAppears AppearsAppearsAppears AppearsSecondsPushPushDegreesEast or WestMinutesSeconds12345GLLGGARMCGSAVTG678910GLL, GGAGLL, RMCGLL, GSAGLL, VTGGGA, RMC1112131415GGA, GSAGGA, VTGRMC, GSARMC, VTGGSA, VTG1617181920GLL, GGA, RMCGLL, GGA, GSAGLL, GGA, VTGGLL, RMC, GSAGLL, RMC, VTG2122232425GLL, GSA, VTGGGA, RMC, GSAGGA, RMC, VTGGGA, GSA, VTGRMC, GSA, VTG