256MEMORY/CALL OPERATION6■ Memory bank selectionThe IC-V82/U82 has a total of 10 banks (A to J). Each mem-ory channel, 0 to 199, may be assigned to one of the banksfor easy memory management.q Push [C• MR ] to select memory mode.w Push [A•FUNC] and [#•BANK] to entermemory bank selection.• Bank indicator blinks.e Rotate [VOL] to select the desiredbank, A to J.• Banks that have no programmed con-tents are skipped.r Push [✱• ENT ] (or [D• CLR ]) to se-lect the bank.• Indicator stops blinking.t Push [YY] or [ZZ] to select the channel in the bank.• No channel numbers are displayed for memory bank operation.y To return to regular memory condition, push [A• FUNC ] and[#• BANK ] to enter memory bank mode, then push[✱•ENT ] (or [D• CLR ]).■ Memory bank settingq Push [C• MR ] to select memory mode, then select the de-sired memory channel via [YY] or [ZZ].w Push [A• FUNC ] and [8• SET ] to enterSET MODE.e Push [YY] or [ZZ] several times until“bAk” appears.• “– –” indication blinks as follows.r Rotate [VOL] to select the desiredbank.t Push [✱•ENT ] (or [D• CLR ]) to assign the channel to thebank and return to regular memory condition.y Repeat steps q to t to assign another memory channelto the same or another bank.NOTE: Display type setting (pgs. 16, 65) in INITIAL SETMODE must be selected “FR,” otherwise the memory bankoperation cannot be performed.[VOL]ENTFUNCASET8MRCPush[VOL]ENTFUNCABANKMRCPush