Icom IC-V82 Instruction Manual

Also see for IC-U82: Addendum Specifications Service manual Instruction manual Instruction manual

Contents

4511DIGITAL MODE OPERATION11■ Digital voice mode operationq Set the desired frequency in VFO mode. (pgs. 13, 14)• Select output power, if desired. (p. 15)w Push [A• FUNC ] then [0• OPT ] to enter OPTION SET MODE ,then push [YY] or [ZZ] several times to select the digital se-lect mode.• “DG” appears.e Rotate [VOL] to turn the digital mode ON.r Push [YY] once to select the your own call sign select mode.• “myC” appears.t Push and hold [0• OPT] for 1 sec. then rotate [VOL] to se-lect the desired your own call sign channel, if you haveprogrammed several call signs.• After selecting the your own call sign, push [0• OPT] to return toOPTION SET MODE.DD When sending a CQ(continued from step t)y Select “CQ” as the station call sign.- Push [YY] or [ZZ] several times to select the call sign se-lect mode.• “yUC” appears.- Push and hold [0• OPT] for 1 sec. then rotate [VOL] to se-lect the desired channel.- Push and hold [0• OPT] for 1 sec. to set “CqCqCq.”- Push [✱•ENT ] (or [D• CLR ]) to exit OPTION SET MODE.uPush and hold [PTT] to transmit and speak into the micro-phone at normal voice level.• Transmit indicator appears and the RF meter shows the output power.i Release [PTT] to return to receive.• The other station call sign will be received.• Received call signs can be stored into the received call recordautomatically. See page 46 for details.NOTE: In the digital mode operation; when “BUSY” indi-cator appears but no sound comes out the speaker, it maybe caused by the interference of analog FM mode. In thiscase, to prevent interference of analog FM mode, set thedigital monitor setting (p. 49) to “An (analog)” then listenon the channel before transmitting by pushing [MONI].Appears