297DTMF MEMORY7D Manual DTMF code transmissionWhile pushing [PTT], push digit keys, [A• FUNC ], [B• CALL ],[C•MR], [D•CLR], [#•BANK] and [✱•ENT ] to transmit a DTMFcode sequence manually.• [✱•ENT ] transmits tone “E”, [#• BANK ] transmits tone “F.”■ DTMF transmission rateWhen slow DTMF transmission rates are required with DTMFmemory transmission (as for some repeaters), the trans-ceiver’s rate of DTMF transmission can be adjusted.qWhile pushing and holding [YY] and[ZZ], turn the power ON to enter INI-TIAL SET MODE.wPush [YY] or [ZZ] several times until“dtd” appears.eRotate [VOL] to select the desiredDTMF transmission rate.• Four rates are available: “1” (100 msec.intervals) is the fastest; “5” (500 msec.intervals) is the slowest.rPush [✱•ENT ] to exit INITIAL SET MODE.[VOL]ENTPWRUSING INITIAL SET MODECALLDUP SCANPRIO ENTSET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPMR CLRFUNC98741 2 3A B DC5 6 0