Icom IC-V82 Instruction Manual

Also see for IC-U82: Addendum Specifications Service manual Instruction manual Instruction manual

Contents

277DTMF MEMORY67■ Programming a DTMF code sequenceThe transceiver has 16 DTMF memory channels (d0 to dF)for storage of often-used DTMF code sequence of up to 24digits. DTMF memories are used to store phone numbers orcontrol codes.q Push [A•FUNC], then push [0•OPT] to enter OPTION SET MODE.• Rotate [VOL] to select “dtm.OF,” if necessary. Or when an op-tional UT-118 DIGITAL UNIT is installed, push [YY] or [ZZ] severaltimes until “dtm.OF” appears.w Push and hold [0•OPT] for 1 sec. to select the DTMF memory.• One of “d0” to “dF” appears.eRotate [VOL] to select the desired DTMF memory.rPush and hold [0• OPT ] for 1 sec. to enter the DTMF pro-gramming mode.• “_ _ _ _ _” appears.• Programmed memories can be cleared in this way.tEnter the desired DTMF code sequence by pushing thedigit keys, [A• FUNC ], [B• CALL ], [C• MR ], [D• CLR ], [#• BANK ]and [✱•ENT ], in the desired sequence.• A maximum of 24 digits can be input.• [✱•ENT ] enters tone “E”, [#• BANK ] enters tone “F.”• If a digit is mistakenly input, push [MONI] or [PTT] momentarilythen repeat from step q.yPush [MONI] or [PTT] to save the digits and exit the DTMFprogramming mode.• Programmed DTMF code sequence sounds when [MONI] ispushed.• Or after 24th digit is input, the transceiver automatically savesthe digits and returns to step w.CALLDUP SCANPRIO ENTSET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPMR CLRFUNC98741 2 3A B DC5 6 0OPT0Push for 1 sec.OPT0Push for 1 sec.FUNCAOPT0Push