236MEMORY/CALL OPERATION6■ Channel name programmingqSelect a “Channel Name Indication” type in INITIAL SETMODE (p. 65).wPush [C• MR ] to select memorymode, if necessary.ePush [A• FUNC ], then push [8• SET]to enter into the channel nameprogramming mode.• The character to be edited blinks.rRotate [VOL] to select a charac-ter.tPush [YY] to move the cursor to right, [ZZ] to move the cur-sor to left.• Up to 5 characters can be used for channel name.• Usable characters are A–Z, 0–9, “space,” +, –, =, ✱, /, [, ] and :.y Push [✱•ENT ] (or [D• CLR ]) to set the name and exit thechannel name programming mode.■ Memory transfersThis function transfers a memory channel’s contents to VFO(or another memory/call channel). This is useful when search-ing for signals around a memory channel frequency and forrecalling the offset frequency, subaudible tone frequency etc.D Memory/call ➾ VFOqSelect the memory (call) channelto be transferred:➥ Push [C• MR ] (or [B• CALL ]) toselect memory (call) mode.➥ Push [YY] or [ZZ] to select thememory channel.• When [VOL] is assigned as tuningdial, rotate [VOL] to select thememory channel. (pgs. 14, 65)wPush [A• FUNC ], then push andhold [C• MR ] for 1 sec. to transferthe selected memory contents tothe VFO.• VFO mode is selected automatically.FUNCAMRCCALLBFUNCAMRCSET8[VOL]ENT