qPush [D• CLR ] to select VFO mode, if necessary.w Set the desired frequency.eSet other information, such as tone, duplex, as desired.rPush [A• FUNC ], then [C• MR ] momentarily.• “X” and memory channel number blink.tPush [YY] or [ZZ] to select the desired memory channel.• When programming the call channel, select “C.”• When [VOL] is assigned as tuning dial, rotate [VOL] to selectthe memory channel. (pgs. 14, 65)yPush [A•FUNC], then push and hold [C•MR] for 1 sec., when3 beeps will sound to program the information into the se-lected memory channel and return to VFO.• After 3 beeps are emitted, continue to hold [C• MR ] to incrementthe displayed memory channel number.MONICALLDUP SCANPRIO ENTSET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPMR CLRFUNCPWR98741 2 3A B DC5 6 0MONICALLDUP SCANPRIO ENTSET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPMR CLRFUNCPWR98741 2 3A B DC5 6 0 MRFUNCACMONICALLDUP SCANPRIO ENTSET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPMR CLRFUNCPWR98741 2 3A B DC5 6 0MONICALLDUP SCANPRIO ENTSET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPMR CLRFUNCPWR98741 2 3A B DC5 6 0 MRFUNCAC■ Programming the memory/call channels226 MEMORY/CALL OPERATION