Icom IC-V82 Instruction Manual

Also see for IC-U82: Addendum Specifications Service manual Instruction manual Instruction manual

Contents

164 BASIC OPERATION■ Display typeThe transceiver has 3 display types to suit your operatingstyle during memory mode operation. The display type isselected in INITIAL SET MODE (p. 65).“Frequency Indication” typeDisplays operating frequency.“Channel Number Indication” typeDisplays memory channel number. In this type only pre-programmed memory channel numbers are displayed.VFO mode cannot be selected.• When the channel indication type is selected, only the followingfunctions can be performed.- Scan function (p. 30)- Output power setting (p. 15)- DTMF memory function (p. 27)- Key lock function (see next set of instructions)- Scan pause timer setting, function key timer setting and LCDbacklight setting in SET MODE (p. 61)“Channel Name Indication” typeDisplays memory channel name you have assigned. In thisdisplay pre-programmed memory channel names are dis-played.VFO mode is selectable.• Programmed frequencies are indicated when you have not pre-programmed the channel names in the selected memory channel.• Push and hold [MONI] to display the operating frequency.■ Key lock functionThe key lock function prevents accidental frequency changesand function activation.Push [A• FUNC ] then push and hold[✱• ENT ] for 1 sec. to toggle thefunction ON and OFF.• “ ” appears while the lock function isactivated.• [PWR], [PTT], [VOL] and [MONI] canbe operated regardless of this setting.USING INITIAL SET MODEFUNCAENT