Icom IC-V82 Instruction Manual

Also see for IC-U82: Addendum Specifications Service manual Instruction manual Instruction manual

Contents

7515SPECIFICATIONS1415GENERAL• Frequency coverage : (unit: MHz)USA Tx: 144–148/Rx: 136–174*Europe, Taiwan, Korea Tx/Rx: 144–146General (LM), CSA (LM) Tx/Rx: 136–174**Guaranteed: 144–148 MHz range only.• Type of emission : FM• Number of memory channels : 207 (incl. 6 scan edges and 1 call)• Frequency resolution : 5, 10, 12.5, 15, 20, 25, 30, 50 kHz• Operating temperature range : –10°C to +60°C; +14˚F to +140˚F• Frequency stability : ±2.5 ppm (–10°C to +60°C)• Power supply requirement : 7.2 V DC (6–10.3 V DC acceptable;Icom’s battery pack only)• Current drain (at 7.2 V DC: approx.):Transmit at 7 W (High) 2.6 Aat 4 W (Middle) 2.0 Aat 0.5 W (Low) 1.0 AReceive standby 80 mApower save 30 mAmax. audio 250 mA• Antenna connector : BNC (50 Ω)• Dimensions (proj. not included) : 54(W) × 139(H) × 36.7(D) mm21⁄8(W)×515⁄32 (H)×17⁄16 (D) in• Weight (approx.) : 390 g; 13.8 oz(with BP-222N and Ant.)200 g; 7.1 oz(without battery pack and Ant.)• Ext. data connector : 3-conductor 2.5 (d) mm ( 1⁄10″)TRANSMITTER• Modulation system : Variable reactance frequency mod.• Output power (at 7.2 V) : 7 W/4 W/0.5 W (High/Mid/Low)• Max. frequency deviation : ±5.0 kHz [Wide]/±2.5 kHz [Narrow]• Spurious emissions : Less than –60 dBc• Microphone connector : 3-conductor 2.5 (d) mm (1⁄10″)/2.2 kΩRECEIVER• Receive system : Double-conversion superheterodyne• Intermediate frequencies : 1st: 46.35 MHz, 2nd: 450 kHz• Sensitivity (at 12 dB SINAD) : 0.16 μV typical• Squelch sensitivity (threshold) : 0.11 μV typical• Selectivity :[Wide] More than 55 dB[Narrow] More than 50 dB• Spurious and image rejection : 80 dB typical• Intermodulation : 65 dB typical• Audio output power : More than 0.3 W at 10% distortion with(at 7.2 V DC) an 8 Ω load• Ext. speaker connector : 3-conductor 3.5 (d) mm ( 1⁄8″)/8 ΩAll stated specifications are subject to change without notice or obligation.■ IC-V82