287 DTMF MEMORY• DTMF memory indication■ Transmitting a DTMF codesequenceD Using a DTMF memory channelq Push [A•FUNC], then push [0•OPT] to enter OPTION SET MODE.• Rotate [VOL] to select “dtm.OF,” if necessary.w Push and hold [0•OPT] for 1 sec. to select the DTMF memory.e Rotate [VOL] to select the desired memory.r Push [MONI] or [PTT] to exit the DTMF memory mode.• Selected DTMF code sequence sounds when [MONI] is pushed.tWhile pushing [PTT], push [MONI] to transmit the selectedDTMF memory.• After the DTMF code sequence is transmitted, the transceiver re-turns to receive automatically.OPT0Push for 1 sec.FUNCAOPT0PushThe DTMF memory consists of 5 pages that are 1st to 5th,6th to 10th, 11th to 15th, 16th to 20th and 21st to 24th dig-its.• 1st pageindication• 4th pageindication• 5th pageindication• 2nd pageindication• 3rd pageindicationAppearsAppears Blinks