369 SUBAUDIBLE TONES■ Pocket beep operationThis function listens for subaudible tones and can be used asa “common pager” to inform you that someone has calledwhen you were away from the transceiver.D Waiting for a call from a specific stationq Set the operating frequency.w Set the desired CTCSS tone frequency or DTCS code inSET MODE.• See p. 35 for programming details.e Push [A• FUNC ], then push [1• TONE].• Repeat several times until “ ” appears when CTCSS, or “ ” ap-pears when DTCS is selected.r Push [A•FUNC], then push [2•P.BEEP] to activate the pocketbeep function.• “ ” appears.t When a signal with the matching tone is received, thetransceiver emits beep tones and blinks “ .”• Beep tones sound for 30 sec. and “ ” blinks. To stop the beepsmanually, push any key. “ ” continues blinking until step y isoperated.y Push [PTT] to answer.• “ ” disappears and cancels the pocket beep function automati-cally.CTCSS DTCSPush FUNCAP.BEEP2CTCSS DTCSPush FUNCATONE1CTCSS DTCSD