Icom iM323 Instruction Manual

Also see for IM323: Instruction manual

32PANEL DESCRIPTION12345678910111213141516i CHANNEL 16/CALL CHANNEL KEY [16/C]Push to select Channel 16. (p. 9)➥Hold down for 1 second to select the Call channel. (p. 9)➥฀ ฀ •฀“CALL”฀appears฀when฀the฀Call฀channel฀is฀selected.Hold down for 3 seconds to enter Call channel program-➥ming mode when the Call channel is selected. (p. 12)o SOFTKEYSThe desired functions as described below can be assignedin the Menu screen.Scan [ ] (p. 17)Push to start or stop a Normal or Priority scan.Dualwatch/Tri-watch [ ] (p. 18)Push to start a Dualwatch or Tri-watch.➥Push to stop a Dualwatch or Tri-watch when either is➥activated.High/Low [ ] (p. 11)Push to set the power to high or low.฀ •฀Some฀channels฀are฀set฀to฀only฀low฀power.Channel [ ] (p. 9)Push to select a regular channel.Channel/Weather channel [ ]* (pp. 9, 11)Push to selects and toggles the regular channel andWeather channel.*Only U.S.A. and Australian version transceivers.AquaQuake [ ] (p. 15)While holding down, the AquaQuake function is activatedto clear water away from the speaker grill.Favorite channel [ ] (p. 17)Push to set or clear the displayed channel as a Favorite➥(Tag) channel.Hold down for 3 seconds to clear or set all Favorite➥channels in the selected channel group.Name [ ] (p. 12)Push to enter the channel name programming mode.Backlight [ ] (p. 15)Push to enter the LCD and key backlight brightness ad-justment mode.฀ •฀฀While฀in฀the฀adjustment฀mode,฀push฀[∫]/[√]/[Ω]/[≈] or rotate Dialto adjust the brightness of the LCD and key backlight.LO/DX [ ]* (p. 11)Push to turn the Attenuator function ON or OFF.฀ •฀“LOCAL”฀appears฀when฀the฀Attenuator฀function฀is฀ON.*Only U.S.A. and Australian version transceivers.Log [ ] (p. 58)Push to enter “RCVD CALL LOG” in the DSC CALLS menu.