Icom iM323 Instruction Manual

Also see for IM323: Instruction manual

197DSC OPERATIONDSC address ID■Programming Individual IDDA total of 100 DSC address IDs can be programmed and as-signed a name of up to 10 characters.Enter “INDIVIDUAL ID” in the DSC SETTINGS menu.qPush [ADD].w฀ •฀The฀“INDIVIDUAL฀ID”฀program฀screen฀is฀displayed.Enter a desired individual ID in the following way:e฀ •฀Select฀a฀desired฀number฀using฀Dial,฀or฀[Y]/[Z]/[Ω]/[≈].฀ •฀Push฀[ENT]฀or฀Dial฀to฀set฀it.฀ •฀฀To฀move฀the฀cursor,฀select฀either฀arrow,฀“←” or “→,” then push[ENT] or Dial.฀ •฀Push฀[EXIT]฀to฀return฀to฀the฀normal฀operating฀mode.฀ •฀Push฀[BACK]฀to฀return฀to฀the฀previous฀screen.The first digit is specified as ‘0,’ and the second digit isother than ‘0’for a Group ID.The first two digits are ‘0’ for any Coast station ID.Repeat stepr e to enter all 9 digits.After entering the 9 digit code, push [ENT] or Dial to set it.t฀ •฀ID฀name฀programming฀screen฀is฀displayed.Enter a desired 10 digit ID name in the following way:y฀ •฀Select฀a฀desired฀character฀using฀Dial,฀or฀[Y]/[Z]/[Ω]/[≈].฀ •฀Push฀[ENT]฀or฀Dial฀to฀set฀it.฀ •฀฀To฀move฀the฀cursor,฀select฀either฀arrow,฀“←” or “→,” then push[ENT] or Dial.฀ •฀Push฀[123],฀[!$?]฀or฀[ABC]฀to฀select฀a฀character฀group.After entering the ID name, select “FINISH” using Dial, oru[Y]/[Z]/[Ω]/[≈], then push [ENT] or Dial to program it.฀ •฀The฀“INDIVIDUAL฀ID”฀list฀screen฀is฀displayed.Push [MENU] to exit the MENU screen.i12345678910111213141516MENU ➪ DSC Settings  ➪ Individual ID(Push [MENU]) (Rotate Dial, then push [ENT].)