Icom iM323 Instruction Manual

Also see for IM323: Instruction manual

748 MENU SCREEN OPERATIONMenu screen items■The Menu screen contains the following items.DSC CallsDItem Ref. Item Ref.฀฀•฀Individual฀Call p. 27 ฀฀•฀Received Call Log p. 58฀฀•฀Individual฀ACK*1 p. 31 ฀฀•฀Position Request Call*2฀฀•฀Group฀Call p. 32 ฀฀•฀Position Report Call*2฀฀•฀All฀Ships฀Call p. 34 ฀฀•฀Polling Request Call*2฀฀•฀Distress฀Call p. 24 ฀฀•฀Test฀Call p. 35฀฀•฀Transmitted฀Call฀Log p. 57 ฀฀•฀Test฀ACK*1 p. 37*1Appears only after receiving a corresponding call.*2Only U.S.A and Australian version transceivers.DSC SettingsDItem Ref. Item Ref.฀฀•฀Position฀Input*3 p. 22 ฀฀•฀Test฀ACK p. 60฀฀•฀Individual฀ID p. 19 ฀฀•฀CH฀16฀Switch p. 61฀฀•฀Group฀ID p. 20 ฀฀•฀Alarm p. 62฀฀•฀Individual฀ACK p. 60 ฀฀•฀CH฀70฀SQL฀Level p. 63฀฀•฀Position฀ACK p. 60 ฀฀•฀DSC฀Loop฀Test p. 63*3Appears only when no GPS information is received.Radio SettingsDItem Ref. Item Ref.฀฀•฀Scan฀Type p. 68 ฀฀•฀Dual/Tri-Watch p. 68฀฀•฀Scan฀Timer p. 68 ฀฀•฀Channel฀Group p. 68ConfigurationDItem Ref. Item Ref.฀฀•฀Backlight p. 69 ฀฀•฀UTC฀Offset p. 70฀฀•฀Display฀Contrast p. 69 ฀฀•฀Inactivity฀Timer p. 71฀฀•฀Key฀Beep p. 69 ฀฀•฀NMEA฀Output p. 71฀฀•฀Key฀Assignment p. 69 ฀฀•฀Remote฀ID p. 71MMSI/GPS InfoDThe transceiver shows the programmed MMSI and ATIS*3codes and GPS information*5.If the code is not programmed, “NO DSC MMSI” or “NO ATISMMSI”*4 is displayed.*4 Appears only for the Dutch and German version transceivers.*5 Appears only when a GPS receiver compatible with NMEA 0183(ver. 2.0 or later) or is connected.Rotate