Icom iM323 Instruction Manual

Also see for IM323: Instruction manual

647 DSC OPERATIONChannel 16 Switch functionDBy regulation, after receiving a Distress call, the transceiv-er switches the operating channel to Channel 16. However,when this setting is set to “OFF,” the function enables thetransceiver to remain on the operating channel, even afterreceiving a Distress call.Enter “CH 16 SWITCH”q in the DSC Settings menu.MENU ➪ DSC Settings ➪ CH 16 Switch(Push [MENU]) (Rotate Dial, then push [ENT].)Rotate Dial or push [w Y]/[Z] to set the Channel 16 Switchfunction to “Auto (No Delay),” “10 Second Delay” or “OFF,”then push [ENT].฀ •฀Push฀[BACK]฀to฀return฀to฀the฀previous฀screen.(default)Auto (No Delay) : After receiving a Distress call, and[ACPT] is pushed on the confirmationscreen, the transceiver immediatelyswitches to Channel 16.10 Second Delay : After receiving a Distress call, and[ACPT] is pushed on the confirmationscreen, the transceiver remains on thecurrent operating channel for 10 sec-onds. After that, the transceiver auto-matically switches to Channel 16.(default)OFF : Even after receiving a Distress call,the transceiver remains on the operat-ing channel.฀ ฀ ฀ ฀฀•฀“ ” appears.Push [EXIT] to return to the normal operating mode.e