Icom iM323 Instruction Manual

Also see for IM323: Instruction manual

607 DSC OPERATIONReceiving a Test Acknowledgement CallDWhen a Test Acknowledgement Call is received:The alarm sounds for 2 minutes.➥“RCVD TEST ACK” pops up. The backlight blinks for 2 min-➥utes.Push [ALARM OFF] to stop the alarm and the blinkingqbacklight.฀ •฀฀If฀[ALARM฀OFF]฀is฀not฀pushed฀within฀2฀minutes,฀the฀next฀screen฀may appear, depending on the received Category.Push a softkey to select your desired action.w[EXIT]Push to return to the normal operating mode.➥฀ ฀ •฀The฀transceiver฀exits฀the฀DSC฀mode.฀ ฀ •฀฀“฀ ” continues to blink and the Call is stored in the ReceivedCall Log.Transmitted Call log■The transceiver automatically stores up to 50 transmittedcalls, and the logs can be used as a supplement to your log-book.Enter “TX CALL LOG” in the DSC CALLS menu.qMENU ➪ DSC Calls ➪ Transmitted Call Log(Push [MENU]) (Rotate Dial, then push [ENT].)฀ •฀Push฀[BACK]฀to฀return฀to฀the฀previous฀screen.฀ •฀Push฀[EXIT]฀to฀return฀to฀the฀normal฀operating฀mode.Push [w Y]/[Z] to select the desired item, then push [ENT].Rotate Dial to scroll the DSC message contents.eRotateTo delete the displayed DSC message, push [DEL].r฀ •฀The฀conirmation฀screen฀appears,฀then฀push฀[OK]฀to฀delete.Push [EXIT] to return to the normal operating mode.t