KERN CWS Operating Instruction

Contents

CWS-BA-e-0610127 Unpacking, Setup and Commissioning7.1 Installation Site, Location of UseThe balances are designed in a way that reliable weighing results are achieved incommon conditions of use.You will work accurately and fast, if you select the right location for your balance.Therefore, observe the following for the installation site:• Place the balance on a firm, level surface;• Avoid extreme heat as well as temperature fluctuation caused by installingnext to a radiator or in the direct sunlight;• Protect the balance against direct draughts due to open windows and doors;• Avoid jarring during weighing;• Protect the balance against high humidity, vapours and dust;• Do not expose the device to extreme dampness for longer periods of time.Non-permitted condensation (condensation of air humidity on the appliance)may occur if a cold appliance is taken to a considerably warmer environment.In this case, acclimatize the disconnected appliance for ca. 2 hours at roomtemperature.• Avoid static charge of goods to be weighed or weighing container.Major display deviations (incorrect weighing results) may be experienced shouldelectromagnetic fields (e.g. due to mobile phones or radio equipment), static electric-ity accumulations or instable power supply occur. Change location or remove sourceof interference.7.2 UnpackingCarefully remove the balance from the packaging, remove packing material andplace balance at the intended workstation.