KERN CWS Operating Instruction

Contents

CWS-BA-e-0610 38.2 Automatic switch-off function AUTO OFF ____________________________ 168.3 Balance zero display/zero tracking__________________________________ 168.4 Stability display _________________________________________________ 168.5 Taring__________________________________________________________ 178.6 Simple operating mode ___________________________________________ 179 Parts counting_________________________________________________ 189.1 Start of add-up process ___________________________________________ 189.2 Determination of the reference weight by weighing ____________________ 199.2.1 Reference piece number 10 _____________________________________________ 199.2.2 Reference piece number 5, 25, 50 or 100 __________________________________ 209.2.3 Optional reference piece number _________________________________________ 219.2.4 Optional reference piece number without using the - key____________________ 229.3 Numeric entering of the reference weight ____________________________ 239.4 Retrieving a stored reference weight via ID no.________________________ 2410 PRE-TARE __________________________________________________ 2511 Storing a reference weight _____________________________________ 2611.1 Storing by ID numbers ____________________________________________ 2611.2 Deleting a stored reference weight __________________________________ 2711.3 Simultaneous deleting of all ID memories ____________________________ 2812 Adding _____________________________________________________ 2912.1 Manual adding-up by pressing the M+ key ___________________________ 2912.2 Automatic adding-up _____________________________________________ 3012.3 Displaying a sum total ____________________________________________ 3012.4 Deleting all stored weighing data ___________________________________ 3012.5 M- function _____________________________________________________ 3013 Weighing/counting with tolerance range _________________________ 3113.1 Parameter selection (see also chapter 14.2) __________________________ 3113.2 Display of set tolerance limits ______________________________________ 3313.3 Changing set tol. limits by using the key instead of setting in menu____ 3314 The menu ___________________________________________________ 3414.1 Navigation in the menu ___________________________________________ 3414.2 Menu overview __________________________________________________ 3515 Description of individual functions ______________________________ 4115.1 ACAI function (automatic counting accuracy improvement = automaticreference optimisation) _________________________________________________ 4115.1.1 ACAI automatic mode _______________________________________________ 4115.1.2 ACAI manual mode _________________________________________________ 4315.2 AWA function (audible weighing assist = acoustic fill-to-target) _________ 4415.2.1 Enabling/disabling the AWA function ____________________________________ 4416 Data output RS 232C__________________________________________ 4716.1 Technical specifications of interface ________________________________ 4716.2 Data output _____________________________________________________ 48