KERN CWS Operating Instruction

Contents

CWS-BA-e-0610 219.2.3 Optional reference piece number1. Turn on balance by pressing theON/OFF key. The three LEDs on thekeys "piece weight by" are flashing. Ifthis is this not the case, press the -key. If desired, place the tare containeron the balance2. Press buttonA tare container will automatically betared.a100.000 Kg ADD gIf required, tare by using TARE3. Enter the reference piece number viathe numeric keypad.(Incorrect inputs can be deleted bypressing the C key ).a200.000 Kg ADD g4. Place the entered piece number to actas reference weight on the balance.The weight of the pieces will be dis-played.The key is flashing.a200.112 Kg ADD ga200.112 Kg 5.61200g5. Press button The display shows "------" for a moment, while the reference weightis being calculated. Dead stop control iscarried out and the calculated referenceweight appears on the display.Note:If "Add ##" appears on the display, you canuse this option to carry out reference opti-misation as the size of the sample was in-sufficient for an accurate count. Place therequested piece number to act as refer-ence optimisation on the balance.(see notechpt.. 9.2.1).Weight of pieces Calculated reference weightNow you can place the parts to be counted onto the weighing plate.All piece number parameters of your load are displayed.