KERN CWS Operating Instruction
                                                 | |
Contents
|
CWS-BA-e-06104816.2 Data outputParameters are set in function F-06-X (see chpt. 14).Data output mode F- 06-01: F- 06-01=“0“ .Data are transmitted by pressing the PRINT key. Data transmission is indicatedby a flashing piece number display. F- 06-01=“1“ .Continuous data transmission The interval between continuous data is c. 2 sec. F- 06-01=“2“ .Data will be transmitted when the weight display is stable at +5d or above. F- 06-01=“3“ .Data is transmitted whilst the weight display is stable at ±5d or above/lower.Selecting output values F- 06-02:To select which data to transmit, enter either "0" or "1" for the data: ID no., piecenumber, weight or reference weightExample: When "1100" is entered only the ID no. and the piece number will be sent.Data format F- 06-03:Apply setting F- 06-03="2" to act as data format for general peripherals.Baud rate F- 06-04: F- 06-04=“0“ :2400 bps F- 06-04=“1“ :4800 bps F- 06-04=“2“ :9600 bps„0“= not send„1“= send8F-06-0288Clear 8 8 a11000ID No.QuantityWeightRef.weight |
Related manuals for KERN CWS
KERN CB Operating Instruction
KERN CXB Operating Instruction
KERN ITT Operating Instruction
KERN ITS Operating Instruction
KERN ITB Operating Instruction
KERN DE Operating Instruction
KERN AEJ-C Operating Instruction
KERN VHB Operating Instruction
KERN ECE Operating Instruction
KERN ABS Operating Instruction
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine