KERN CWS Operating Instruction

Contents

CWS-BA-e-0610 3313.2 Display of set tolerance limitsCondition: F-09-01 = „0“, see chpt. 14.21. Switch on balance2. Press the key and the set uppertolerance limit will be shown and flash-ing.a1020.000 Kg Hi3. Press the key again and the setlower tolerance limit will be shown andflashing.4. Press the key again and the bal-ance will return to counting modea980.000 Kg Lo13.3 Changing set tolerance limits by using the key instead of setting inmenu1. Press the key and the set uppertolerance limit will be shown and flash-ing. To change the upper tolerance limit,enter the desired value via the numerickeypad.2. Press the key, the new upper limitwill be stored and the lower limit dis-played. a1020.000 Kg Hi3. To change the lower tolerance limit, en-ter the desired value via the numerickeypad4. Press the key and the new lowerlimit will be stored and the balance willreturn to counting mode.5. If you do not wish to store the new limit,press the key. The balance returnsto weighing modea980.000 Kg LoStored tolerance limits will be retained even after the balance was turned off.