KERN CWS Operating Instruction
                                                 | |
Contents
|
CWS-BA-e-0610 3113 Weighing/counting with tolerance rangeThis function enables weighing of a certain weight or piece number within fixed toler-ances, e. g. for control weighings. The achievement of tolerance limits is indicated byan optical/acoustic signal.Overlay d indicates:+ Piece number / weight above upper tolerance limitTOL 3 Piece number / weight within tolerance range- Piece number / weight below lower tolerance limit13.1 Parameter selection (see also chapter 14.2)1. Switch off the balance2. Keep pressing the key and press thekey. The first function F-00 will beshown and flashing. Then let go of bothkeys.F-003. Call up the "fill to target function" by press-ing 5 on the numeric keypad. F-054. Press the key for the current setting toappearF-05-0105. Enter the desired mode (see chpt. 14.2)using the numeric keypad. F-05-0116. Use the -key to store. The next menuitem "F-05-02" used to select data to becompared appears. 0 = Count data 1 = Weight dataF-05-021 |
Related manuals for KERN CWS
KERN CB Operating Instruction
KERN CXB Operating Instruction
KERN ITT Operating Instruction
KERN ITS Operating Instruction
KERN ITB Operating Instruction
KERN DE Operating Instruction
KERN AEJ-C Operating Instruction
KERN VHB Operating Instruction
KERN ECE Operating Instruction
KERN ABS Operating Instruction
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine