CWS-BA-e-0610 3514.2 Menu overviewF- 01-X operationFunctionkeyParameterselection Description of functionOperating mode0* Standard Operation. All functions and keys are availableF-01-011 Simplified operating mode Reference weight can be determined byweighing. All other keys are disabled (chpt.. 7.11)"Add##" additional piece number requirement (see notes "chpt. 9.2.1")The additional piece number demand ensures during piece counting that no insufficientreference weight is used as this could result in inaccurate results. It is possible to en-able or disable this function.0 "Add" function disabled. Light reference weight is accepted without"Add" demand.1* It is possible to enter the reference weight without the required addi-tional "Add" pieces (via ENTER key).F-01-022 It is not possible to enter the reference weight without the requiredadditional "Add" pieces (via ENTER key).F-01-03 0 Always use this settingDisplay of last reference weight usedEach time the balance is turned on the last used reference weight will be displayed. Itis possible to enable or disable this function.0* Last used reference weight will be deletedF-01-041 Last used reference weight will be displayed automaticallyContent ID memory00 The ID memory merely contains the reference weightF-01-05Tare value00TolerancelimitYou may select which other data should be stored in addition to the ref-erence weight by entering 0 (no) or 1(yes) for the data (tare value ortolerance limit).Example: 10 = ID memory contains reference weight and tolerance limits