KERN CWS Operating Instruction

Contents

CWS-BA-e-0610 199.2 Determination of the reference weight by weighing9.2.1 Reference piece number 101. Turn on balance by pressing the ON/OFFkey. The three LEDs on the keys "pieceweight by" are flashing. If this is this not thecase, press the - key. If desired, placethe tare container on the balance2. Press buttonA tare container will automatically be tared. a100.000Kg ADD gIf required, tare by using TARE3. Place10 single pieces to act as referenceweights on the balance. The weight of all 10pieces will be showna100.056Kg ADD ga100.056Kg 5.61200g4. Press button The display shows "------"for a moment, while the reference weight isbeing calculated. Dead stop control is carriedout and the calculated reference weight ap-pears on the display.Weight of pieces Calculated referenceweightNote: If "Add ##" appears on the display, you canuse this option to carry out reference optimi-sation as the size of the sample was insuffi-cient for an accurate count. Either add the required piece number or ig-nore the message "Add ##" and continue thecounting process by pressing the ENTERkey. (This, however, will not give accurateresults). See also function "F-01-02", chpt..14.25. Now you can place the parts to be countedonto the weighing plate. All piece number pa-rameters of your load are displayed. For further information about reference opti-misation see chpt. 15.1).a100.004 Kg ADD 15