KERN CWS Operating Instruction

Contents

CWS-BA-e-0610209.2.2 Reference piece number 5, 25, 50 or 1001. Turn on balance by pressing the ON/OFFkey. The three LEDs on the keys "pieceweight by" are flashing. If this is this notthe case, press the - key. If desired,place the tare container on the balance2. Press buttonA tare container will automatically betared. a100.000 Kg ADD gIf required, tare by using TARE3. To select the reference piece numberpress the key repeatedly until the de-sired reference piece number appears.10 → 5 →25 →50 →100 →10.The larger the reference quantity, thehigher the counting exactness.a500.000 Kg ADD g4. Place the selected piece number to act asreference weight on the balance. Theweight of the pieces will be displayed.The key is flashing.a500.280 Kg ADD ga500.280 Kg 5.61200g5. Press button The display shows"------" for a moment, while the referenceweight is being calculated. Dead stopcontrol is carried out and the calculatedreference weight appears on the display.Note:If "Add ##" appears on the display, you canuse this option to carry out reference optimi-sation as the size of the sample was insuffi-cient for an accurate count. Place the re-quired pieces on the balance for referenceoptimisation.Weight of pieces Calculated reference weightNow you can place the parts to be counted onto the weighing plate.All piece number parameters of your load are displayed.