CWS-BA-e-0610 2912 AddingThe balance is equipped with a summation memory used for adding up of identicalcounted parts to total quantity and total weight.The balance is set by the factory for manual adding-up (by pressing the M+ key). Forautomatic adding-up the function F-03-01 must be set to “1” (see chpt. 14.2) in themenu.Likewise you can activate the summation data (positive/negative weighing values) inthe menu, see function F-03-02 (chpt. 14.2).12.1 Manual adding-up by pressing the M+ key1. Select reference weight and placenumber of parts for first weighing.2. After carrying out a rest position controladd the display value to the summationmemory by pressing the key.The stored value is indicated by a bleepand the flashing [W ] display next to"M+". After dead stop control was car-ried out the balance will return auto-matically to counting mode.123Place the piece number on the balance for a second weighing and add them to thememory by pressing the M+ key.Add and weigh more parts if needed as described above.Please note that the balance must be unloaded between the individual weighing pro-cedures (display < +5d).Note:If the balance issues four bleeps or if the [W ] display next to "M+" does not flash, thebalance was not unloaded between the individual weighings or the weighing value isnot stable (see also function F-03-02)Deleting the last M+ sum up1. Keep pressing the key, press the key, then let go of both.2. The balance issues a bleep and deletes the last M+ sum up.If 4 bleeps are sounded, there are no M+ sum ups to delete.