KERN CWS Operating Instruction

Contents

CWS-BA-e-0610229.2.4 Optional reference piece number without using the - key1. Turn on balance by pressing theON/OFF key. The three LEDs on thekeys "piece weight by" are flashing. Ifthis is this not the case, press the -key. If desired, place the tare containeron the balance and tare by pressing theTARE key.a00.000 Kg 0.00000g2. Place the piece number to act as refer-ence weight on the balance. The weightof the pieces will be displayed.a00.112 Kg 0.00000g3. Enter the piece number via the numerickeypad.(Incorrect inputs can be deleted bypressing the C key ).The key is flashing.a200.112 Kg ADD ga200.112 Kg 5.61200g4. Press button The display shows"------" for a moment, while the refer-ence weight is being calculated. Deadstop control is carried out and the calcu-lated reference weight appears on thedisplay.Note:If "Add ##" appears on the display, you canuse this option to carry out reference opti-misation as the size of the sample was in-sufficient for an accurate count. Place therequested piece number to act as refer-ence optimisation on the balance.(see notechpt.. 9.2.1).Weight of pieces Calculated reference weightNow you can place the parts to be counted onto the weighing plate.All piece number parameters of your load are displayed.