CWS-BA-e-06103414 The menu14.1 Navigation in the menu1. Switch off the balance2. Keep pressing the key and press thekey. The first function F-00 will beshown and flashing. Then let go of bothkeys.F-003. Invoke the desired function (see chpt. 13.2)by pressing the appropriate numeric key(e.g. 5). F-054. Confirm by pressing the key, the piecenumber display will appear and the functionand current setting will be flashing. Nowyou are able to either change the setting(step 5) or to go to the next function (step6)F-05-0105. Enter the desired setting (see chpt. 13.2)via the numeric keypad• Incorrect inputs can be deleted by pressingthe C key, repeat input .• If you want to cancel the process withoutstoring any inputs after pressing the EN-TER key for the last time, press theON/OFF key to cancel.F-05-0116. Press the key to store your changesand to go to the next function.F-05-0217. To exit the menu, press the key. Use again the -key to switch the bal-ance on. If "Add ##" appears on the display, you can use this option to carry out referenceoptimisation as the size of the sample was insufficient for an accurate count.Either add the required piece number or ignore the message "Add ##" and con-tinue the counting process by pressing the ENTER key. (This, however, will notgive accurate results). See also function "F-01-02", chpt.. 14.2.