Kenwood TK-7100H Service Manual

Also see for TK-7100H: Specifications Service manual

Contents

6 DTMF206.2.6 DTMF Hold TimeDTMF Hold Time is the hold time (2 seconds) afterthe transceiver transmits DTMF.With this function, the user does not have to pressand hold the PTT switch to transmit the DTMF.Note: The transceiver stops transmitting when the DTMF Keyis released before the PTT switch. Example• The transceiver stops transmitting twoseconds after the DTMF key is released.• The transceiver stops transmitting immediatelyafter the DTMF key is released.6.2.7 Manual DialThis function allows you to manually transmit theDTMF Tone using the Keypad.The operations differ when Keypad Auto PTT isenabled or disabled.6.2.8 Keypad Auto PTTThis function allows you to transmit the DTMF Toneusing the keypad when Manual Dial is enabled,without having to press the PTT switch.The Keypad Auto PTT box is greyed out whenManual Dial is disabled.The Store & Send box is greyed out when KeypadAuto PTT is enabled, and vice-versa.6.2.9 AutodialThis function allows you to automatically transmit theDTMF Code (Autodial Memory).You can program up to 9 Autodial Memories.6.2.9.1 Transmitting from the AutodialMemory:1 Press the [*] key.2 Enter the Autodial Memory number you want totransmit (1 ~ 9). The Error tone sounds when theselected Autodial Memory is not programmed. ExampleThe following display appears when transmittingthe code “123”.3 Press the PTT switch to transmit the DTMF Code.6.2.9.2 Autodial Memory Storage:You can store numbers to the Autodial Memoryusing a keypad.1 Press the [#] key.2 Enter the DTMF Code. ExampleThe following display appears when entering thecode “123456”.3 Press the [#] key again.4 Press a key from 1 ~ 9 to save the DTMF Code tothe Autodial Memory.• To enter [#] for the DTMF Code, press the [#] keywhile pressing the PTT switch. ExampleTo enter “12 #”, press key [1] press key [2] press and hold the PTT switch while pressingthe [#] key.