Kenwood TK-7100H Service Manual

Also see for TK-7100H: Specifications Service manual

Contents

12 Self Proguamming Mode34• You can program the QT in steps of 0.1 Hz.• You can program the QT according to the normaltable of frequencies.• You can program the DQT (Normal) in steps of 1.• You can program the DQT (Normal) according tothe normal table of codes.• The QT/DQT is not used.Press and hold the [|] key for more than 1second to toggle between Normal and Inversewhen DQT is selected.• “N” represents Normal.• “I” represents Inverse.12.2.1.3 TX FrequencyThis function allows you to program the transmitfrequency.The current frequency appears after the “T.”.Press the [|] key to change the frequency step.Press and hold the [|] key for more than 1 secondon a programmed Channel, to delete the Channel.Press and hold the [|] key for more than 1 secondon a Channel that is not programmed, to display thedefault frequency.12.2.1.4 QT/DQT EncodeThis function allows you to program the QT/DQTEncode.The following display appears when the QT/DQTEncode is not programmed.Press the [|] key to program a QT frequency or DQTcode.• You can program the QT in steps of 0.1 Hz.• You can program the QT according to the normaltable of frequencies.