Kenwood TK-7100H Service Manual

Also see for TK-7100H: Specifications Service manual

Contents

7221 KCT-31The PC controls the transceiver when modifying andconnecting the Interface Cable (KCT-31) to theTK-7100H/8100H.Following is the modification method:• The KCT-31 has three connectors.Red SBBlack GNDGreen RxDYellow TxD• Cut the cable as shown in the following figure.• Solder the line to re-connect the line.• Change the position of pins.(Use pins 1, 3, 5, and 6, from the left.)• Connect the connector to CN 2 of theTK-7100H/8100H from the left (1st pin side). ThePC controls the transceiver using the RxD/ TxDprogrammed to the Function PortNote: Connect the 8 Pin connector to CN 2 (2nd Pinconnector). Do not connect the connector to thewrong terminal.

/ 75

Related manuals for Kenwood TK-7100H