Kenwood TK-7100H Service Manual

Also see for TK-7100H: Specifications Service manual

Contents

8 Emergency Mode288.1.10 Light Control Port Logic forEmergencyThis function operates the same as the Horn ControlPort Logic for Emergency.You can toggle the Light Control logic between Highand Low.8.1.11 Emergency MicEmergency Mic is used to select the microphone tobe used in the Emergency Mode.Voice is transmitted when the transceiver is in theEmergency Mode and the Emergency Mic is Normal.The dispatcher will not be able to receive voicesignals when the handheld microphone is removed orbroken.The transceiver has a terminal (EMGMIC) forconnecting another microphone.Voice spoken to the microphone connected to theEMGMIC terminal and the handheld microphone willbe automatically transmitted when the transceiver isin the Emergency Mode and the Emergency Mic isset to Internal Mic.We recommend that you keep the microphoneconnected to the EMGMIC terminal in a safe andhidden location.Note: You can connect any aftermarket microphone to theEMGMIC terminal.8.1.12 Emergency DisplayThis function allows you to program the display whenthe transceiver enters the Emergency Mode. RevertThe current display remains when the transceiverenters the Emergency Mode. TextA pre-programmed message appears during theEmergency Mode. The message may contain upto 12 characters.Note: The Emergency Display configuration is disabled whenthe Secret Emergency function is programmed.8.1.13 Emergency CycleThis function allows you to program the number oftimes that the transceiver switches betweentransmission and receiption.The transceiver switches between automatictransmission and reception for the programmednumber of times. It enters normal operation when itfinishes the cycle. The transceiver continues toswitch between automatic transmission andreceiption when this function is programmed asContinuous until reset.8.1.14 Secret EmergencyThis function allows you to select whether or not tounmute the speaker in the Emergency Mode. EnableThe transceiver mutes the speaker, and the busyicon and transmission icon do not flash. Werecommend that you enable this function whenyou do not want to emit any alert tones. DisableThe transceiver emits the alert tone and the busyicon and transmission icon flash.8.1.15 Emergency Power SwitchThis function allows you to select whether or not tocontinue Emergency operation during the EmergencyMode.This function is available when the Secret Emergencyfunction is enabled. EnableYou can continue automatic transmission andreception even after turning the transceiver OFF.When this function is enabled, the display simplyblacks out.The transceiver transmits the user’s voice even ifthe transceiver is turned OFF. DisableThe transceiver switches OFF.Note: The Emergency Power Switch configuration isdisabled when Secret Emergency is disabled.Note: The backlight of the Keypad Microphone flashes evenwhen the display blacks out. We recommend you usethe KMC-30 when using this function.