Kenwood TK-7100H Service Manual

Also see for TK-7100H: Specifications Service manual

Contents

6 DTMF23This code allows you to make a Group call usingDTMF. ExampleRadio A ID 123 Group Code BRadio B ID 124 Group Code BRadio C ID 143 Group Code BRadio D ID 125 Group Code OffRadio E ID 143 Group Code BRadio F ID 224 Group Code B• Stations A and B receive a call when station Dtransmits “12B”.• Stations A, C and E receive a call when station Dtransmits “1B3”.• Stations B and F receive a call when station Dtransmits “B24”.• Stations other than D receive a call when station Atransmits “BBB”.• Station D receives a call only when code “125” isused (Individual call only).Note: The Group Call beep tone sounds when receiving acall using the Group Code.Note: The transceiver does not transpond when receiving acall using the Group Code.6.3.5 Alert Tone LevelThis function allows you to program the volume levelof the Call Alert Tone. When setting the volume levelof the Call Alert Tone to Current, it becomes the sameas the current volume level.Default CurrentRange Current/ 0 ~ 316.3.6 Auto Reset TimerThe Auto Reset Timer is the time from whencommunication ends to when the DTMF “MatchStatus” status is reset.“Match status” indicates that the user cancommunicate using only QT/DQT after the DTMFcodes match.The match status is reset when the Auto Reset Timerexpires, after the user ends communication.You may disable this function.“Match status” is reset when activating the Monitor orScan function, or when changing the Channel.Default 10 sRange OFF/ 0 ~ 15 s6.3.7 Call AlertThe Call Alert Tone sounds when receiving a callusing DTMF.There are three types of tones. You may also disablethe tone. NormalThe Call Alert Tone sounds only once. ContinuousThe Call Alert Tone keeps sounding for theduration of time programmed in the Auto ResetTimer. Press any key to stop the tone. SpecialThe selected tone sounds. NoThe tone does not sound.6.3.8 TranspondThis function allows you to automatically transmit theAlert or Code, when the ID Code matches, in order tonotify the caller that you have received a call.There are three types of Transpond. You can alsodisable this function. OFFThe transceiver does not transpond. AlertThe transceiver automatically transmits the AlertTone. ID CodeThe transceiver automatically transmits the IDCode. Transpond (ADM1)The transceiver automatically transmits the DTMFCode programmed in Autodial Memory location 1.Note: An Error Beep sounds when selecting Transpond(ADM1) when Autodial Memory location 1 is notprogrammed.Note: The Call Alert Tone sounds after transponding whenusing the Transpond function and the Call Alertfunctions at the same time. With the Clear toTranspond function, the Call Alert Tone may notsound, as the transceiver holds Transpond.6.3.9 Stun Type