Kenwood TS-990S Service Manual
Also see for SP-990: Instruction manual
                                                                                                                                                                                                                                                    | |
TS-990S204ADJUSTMENTItem ConditionMeasurement AdjustmentSpecifications/RemarksTest-equipment Unit Terminal Unit Parts MethodProtection• 50M2) Menu No.: 106 (50.1MHz,CW)TransmitUse a cable that is 1m longTS-990 (1m cable)Power meter (Direct connection)150 dummy load150dummyloadThroughtypepowermeterRearpanelANT1 Frontpanel[UP]/[+](F5)or[DOWN]/[-](F4)Set the adjustmentvalue wiithin thelimit of the specifi edpower.80W±2W35. SWR meter• 14M(SWR: 3)1) Menu No.: 107 (14.1MHz,CW)Transmit150 dummy connection :Use a cable that is 18cm long150dummyloadRearpanelANT1 Frontpanel[UP]/[UP-DATE](F5)1 push SWR meter lights up to 3position.• 50M(SWR: 3)2) Menu No.: 108 (50.1MHz,CW)Transmit150 dummy connection:Use a cable that is 18cm long• Writing data : After items 1 and 7~35 have been adjusted;1) Menu No.: 1282) [APPLY] (F7) key: Push once time.36. SWR meterCheck• 1.81M1) Main display f.: 1.810000MHzMode: CWTransmit150 dummy connection:Use a cable that is 18cm long150dummyloadRearpanelANT1 Check the SWRmeter.SWR meter position: 337. AT Check• 1.81M1) Main display f.: 1.810000MHzMode: CWAT: ON (Press and hold the[AT] key)Transmit150 dummy connection:Use a cable that is 1m longSWR meter position: 1.3 orless38. SWR meterCheck• 14.1M1) Main display f.:14.100000MHzMode: CWAT: OFFTransmit150 dummy connection:Use a cable that is 18cm longSWR meter position: 3 |
Related manuals for Kenwood SP-990
manualsdatabase
Your AI-powered manual search engine