Language Dictionary - 4[SOURce:]FUNCtion:MODEChannel SpecificThis command determines whether the input regulation mode is controlled by values in a list or by theFUNCtion command setting.FIXed The regulation mode is determined by the FUNCtion or MODE command.LIST The regulation mode is determined by the active list.Command Syntax [SOURce:]FUNCtion:MODE Parameters FIXed | LIST*RST Value FIXedExamples FUNC:MODE FIXQuery Syntax [SOURce:]FUNCtion:MODE?Returned Parameters Related Commands FUNC MODE[SOURce:]RESistanceChannel SpecificThis command sets the resistance of the load when operating in constant resistance mode. Refer toTable 4-1 for model-specific programming ranges.Command Syntax [SOURce:]RESistance[:LEVel][:IMMediate][:AMPLitude] Parameters 0 through MAX | MINimum | MAXimumUnit Ω (ohms)*RST Value MAXimumExamples RES 5 RES:LEV .5Query Syntax [SOURce:]RESistance[:LEVel][:IMMediate][:AMPLitude]?Returned Parameters Related Commands RES:TLEV RES:MODE[SOURce:]RESistance:MODEChannel SpecificThis command determines whether the resistance setting is controlled by values in a list or by theRESistance command setting.FIXed The resistance setting is determined by the RESistance command.LIST The resistance setting is determined by the active list.Command Syntax [SOURce:]RESistance:MODE Parameters FIXed | LIST*RST Value FIXedExamples RES:MODE FIXQuery Syntax [SOURce:]RESistance:MODE?Returned Parameters Related Commands RES: RES:TRIG65
