Configuring Your Server 4-53Notes on Creating Virtual Disk The HDDs configuring the disk group should have the same capacity and rotation speed. Be sure to execute Consistency Check after creating VD. When installing an OS in VD under the Internal RAID Controller (N8103-116 orequivalent), create a VD dedicated to OS installation. WebBIOS cannot be handled via remote console functions of NEC DianaScope. The physical drive numbers shown in WebBIOS and those shown in Universal RAIDUtility are identified as follows.– WebBIOSEnclosure number and Slot number shown in Physical Drives box** "X:X:X" shown in Physical Drives box represents Connector number:Enclosurenumber:Slot number. With this server, the Connector number is not supported,thus, it is always indicated as "()". The Enclosure Number is always "1". The Slotnumber represents a slot number of disk bay.– Universal RAID UtilityEnclosure number and Slot number shown in Physical Device PropertiesNote that the slot numbers shown in Physical Drives box of WebBIOS are represented by0-origin numbers, but those in Universal RAID Utility are 1-origin numbers.Physical Drives View of WebBIOSProperty of Physical Device in Universal RAID Utility
