3-4 Setting Up Your ServerSELECTING SERVER SITERead the following precautions before selecting a suitable site for your server. The followingdescribes installation of the server and connections to the server.CAUTIONObserve the following instructions to use the server safely. Failure to followthese instructions may cause a fire, personal injury, or property damage. Seepages 1-3 to 1-8 for details.■ Never attempt to lift the server only by yourself.■ Do not install the server in any place other than specified.The following figure illustrates a site suitable for installing the server.* It is recommended that the server should be used in a room wheretemperature is in the range between 15 to 25ºC.Clean and tidy roomAllow clearance of at least 150 mm infront of and behind the server.100 to 120 Vac/200 to 240Vac parallel bi-polar wallpower outlet with theground line.Room that satisfies thefollowing conditions: *Temperature: 10 to 35ºCHumidity: 20 to 80%Temperature gradient: ±10ºC/hAtmosphere: 749 to 1040 hpaTemperature: –10 to 55ºCHumidity: 10 to 80%Temperature gradient: ±15ºC/hAtmosphere: 749 to 1040 hpaClose enough to connect themouse and the display.Install the server ona flat, rigid deskThe server must befixed with stabilizers.
