General Description 2-25When you fail to eject:When you fail to eject the tray with the Open/Close button and take out the disc from the server,follow the procedure below.1. Press the POWER switch to power off the server. (The POWER/SLEEP lamp goes off.)2. Insert a metal pin of approximately 1.2 mm in diameter and 100 mm in length (astraightened large paper clip will make a substitute) into the emergency hole on the frontof the optical disk drive and gently push it in until the tray is ejected.IMPORTANT: Do not use a toothpick or plastic stick that is easy to break. If the above procedure does not let you take out the DVD/CD-ROM,contact your service representative.3. Hold the tray and pull it out.4. Take out the disc.5. Push the tray back into position.Emergency hole
