3-6 Setting Up Your ServerCONNECTING PERIPHERAL DEVICESConnect peripheral devices to the server. The server is provided with connectors for wide variety ofperipheral devices. The figure on the next page illustrates available peripheral devices for the serverin the standard configuration and locations of the connectors for the devices.CAUTIONObserve the following instructions to use the server safely. Failure to followthese instructions may cause a fire, personal injury, or property damage. Seepages 1-3 to 1-8 for details.■ Do not use any damaged cable connector.■ Do not use any unauthorized interface cable.■ Do not use the server with any loose interface connection.■ Do not step on the interface cable or place any heavy object on it.IMPORTANT: Power off the server and a peripheral device before connection.Connecting a powered peripheral device to the powered server willcause malfunctions and failures. To connect a third-party peripheral device or interface cable to theserver, consult with your service representative for availability ofsuch a device or cable. Some third-party devices may not be usedfor the server. To connect the provided keyboard and mouse, plug their connectorsto the server with the "∆" mark on the connectors facing right. Do not connect the serial ports with the telephone line directly. Do not connect any devices to the connectors not instructed in thissubsection. Doing so could damage the device, your server, or both.
