Installing Windows Server 2003 E-21Also, add or delete any protocols and services if necessary.You can operate the process on the property dialog box for local area network which can beappeared from [Network and Dial-up Connection].NOTE: We recommend you to add [Network Monitor] at [AddingServices]. [Network Monitor] can monitor the frame (or the packet) thatthe computer installing [Network Monitor] sends or receives. This toolis valuable when analyzing network trouble. For information on how toinstall the tool, see the "Setup for Trouble Process" later in thisdocument.Re-install the Network DriverThe network driver will be installed automatically.See Chapter 5, "Optional Network Board Driver" for re-install the optional network board driver.Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB)See Chapter 5, "Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB)" for reset theAdapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB).Graphics Accelerator DriverIf you utilize standard graphics accelerator drivers, update your system with NECEXPRESSBUILDER DVD attached to your system.Standard graphics accelerator drivers will be installed automatically.Please follow the following procedure when you want to re-install the driver individually.1. Insert the NEC EXPRESSBUILDER DVD into the optical disk drive.If the autorun menu is displayed, close menu screen.2. Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].3. Run "setup.exe" in the following directory.\003\win\winnt\dotnet\video\setup.exe4. Follow the message to continue the installation.If the dialog message "Digital Signature could not been found." appears, select [Yes] tocontinue.5. Remove the NEC EXPRESSBUILDER DVD from the optical disk drive, restart thesystem.
